Low Voltage DC Drive - Two Amp Motor Speed Controller

		200XLV 2 Amp - Low Voltage Direct Current (DC) Controller
		The 200XLV is a quick response, Direct Control (DC) motor speed controller for driving brushed DC motors and gear-motors up to 100 watts. The 200XLV will motor and brake in both directions of rotation and operate from a single polarity supply, either battery or unregulated DC source.

Great performance allows the 200XLV to meet the most challenging of low voltage DC drive applications, and the far-reaching specification includes many standard characteristics not normally associated with a drive the size and cost of this controller.
The pocket-sized design has plug in screw terminals and provision for a back panel of DIN rail mounting. The 200XLV is fully emc compliant and CE marked.

Key Features include:

Motor and brakes in both directions.

Ideal for small DC motors and linear actuators up to 48V.

Fast response.

+/-2A output, with 150% overload capability.

+ve and -ve differential speed inputs.

Built in thermal protection with resettable trip.

Current limit protection.

3 term PID control action.

Armature or tacho feedback operation.

Position control facility.

Setpoint ramp facility.

High bandwidth with suberbly linear output.

Accepts bipolar or unipolar command inputs.

Easily interfaced for limit switch operation.

Adjustable IR compensation for improved AVF speed regulation.

Dimensions 82 x 40 x 50 (mm), 3.2" x 1.6" x 2"

Product manual

Rating table
Voltage Limit	Current Limit	Input supply	Presets	References	Speed inputs	Control action
For DC motors with a maximum voltage ratings from +/-6V up to +/-48V	0 to +/-2 amps continuous, +/-3 amps peak.	12 to 48V DC, +/-25%.	Max speed limit IR comp 0 to 6 ohms	Precision current limited voltages references +10V, +5V, 5mA max.	Differential inputs.	P or P+I or PID, armature, tacho or position feedback.

£100 (exc VAT) each with free UK shipping!

tel/fax: 0208 820 0788
email: DCdrives@cuttingedgeconstruction.co.uk

low-voltage-dc-drive.com is a trading name of cutting edge construction ltd.

Cutting Edge Construction Ltd is a company registered in England.
Registered Company Number: 04291603.
Registered Address: Third Floor, 111 Charterhouse Street, London, EC1M 6AW.
VAT Registration Number: GB858630690.